NAVIGATION SYSTEM (for Radio and Display Type) CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD

   
   

   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD.

   
   

   NG

   END (CD IS FAULTY)

   OK

2. CHECK CD

   
   

   1. 

      Check the CD.

      OK
      The CD is clean.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Tech Tips

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   
   

   NG

   CLEAN CD

   OK

3. REPLACE CD AND RECHECK

   
   

   1. Replace the CD with a new or known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   

   NG

   CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

   OK

   END (CD WAS FAULTY)

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

   
   

   1. Check the radio and display receiver assembly installation condition.

      
      

      1. Check that the radio and display receiver assembly is properly installed.

         OK
         The radio and display receiver assembly is properly installed.

   
   

   NG

   REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

   OK

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here