INSTRUMENT PANEL SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. Connect the connector.

    2. A01EW60E01
      Text in Illustration
      *A LH Side
      *B RH Side

      Install the front No. 2 speaker assembly with the 2 screws.

      Note

      Do not touch the speaker cone.

      Tech Tips

      Install the screws in the order shown in the illustration.

  2. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01EYPQ

      Engage the 2 guides.

    2. Engage the 3 claws and 2 clips to install the No. 1 instrument panel speaker panel sub-assembly.

  3. INSTALL FRONT PILLAR GARNISH


    1. Remove the protective cover.

    2. Make sure that the front pillar garnish clip is not damaged.

      Note

      If there is any damage, replace the garnish clip with a new one.

    3. A01EV6Z

      Install the front pillar garnish clip to front pillar garnish LH.

      Tech Tips

      Install the front pillar garnish clip so that it faces as shown in the illustration.

    4. Engage the 2 guides as shown in the illustration.

    5. A01EXMZ

      Engage the 2 clips to install the front pillar garnish LH.

  4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

    for LH side: Click here

    for RH side: Click here

  5. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)


    1. Connect the connector.

    2. A01EUDEE01

      Install the front No. 3 speaker assembly with the 2 screws.

      Note

      Do not touch the speaker cone.

      Tech Tips

      Install the screws in the order shown in the illustration.

  6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY (for 10 Speakers)


    1. Connect the connector.

    2. A01ETDJ

      Engage the 4 clips to install the No. 2 instrument panel register assembly.

      Note

      When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

  7. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY (for 10 Speakers)


    1. Connect the connector.

    2. A01ESZW

      Engage the 6 clips to install the No. 1 speaker opening cover assembly.

  8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 10 Speakers)


    1. A01EWUZ

      Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.