HEADLIGHT CLEANER SWITCH INSPECTION


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY


    1. A01ETKDE26
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Cleaner Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      I9-1 (L) - I9-4 (B) Headlight cleaner switch on Below 1 Ω
      Headlight cleaner switch off 10 kΩ or higher

    2. Connect a battery positive (+) lead to terminal I9-3 (ILL+) and a negative (-) lead to terminal I9-2 (ILL-).

    3. Check that the headlight cleaner switch assembly illumination comes on.

      OK
      The headlight cleaner switch assembly illumination comes on.

      If the result is not as specified, replace the headlight cleaner switch assembly.