HEADLIGHT CLEANER ACTUATOR INSTALLATION


  1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY


    1. Engage the guide to the front bumper assembly, then push the tab (A) and engage the claw as shown in the illustration.

      A01EUNUE01

    2. Install the bolt.

      Torque:
      1.1 N*m  { 11 kgf*cm, 10 in.*lbf }

    3. Connect the headlight cleaner hose and engage the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY


    1. A01EYYO

      Engage the 2 claws to install the headlight washer nozzle sub-assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here