WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A01EUXK

      Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. A01EUP1

      Remove the clip.

    2. A01EVJYE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

    3. A01EUCCE01
      Text in Illustration
      *1 Grommet

      Remove the 5 screws.

    4. Remove the 4 clips, 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WASHER FLUID


    1. A01ETMG

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01EY8F

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.