WASHER NOZZLE INSTALLATION


  1. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01EU3PE01

      Engage the 2 claws to install the washer nozzle sub-assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the ignition switch ON, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01EV6XE01
      Standard Clearance
      Area Measurement Area Measurement
      A 300.0 mm (11.8 in.) B 145.0 mm (5.71 in.)
      C 170.0 mm (6.69 in.) - -
      Text in Illustration
      *a Upper Limit *b Standard
      *c Lower Limit - -

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.

  3. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A01ET21E03
      Text in Illustration
      *a Washer Fluid Spray Angle *b Part Number