RADIO RECEIVER INSTALLATION


  1. INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

  2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EX2D

      Engage the guide and 4 clips to install the air conditioning control assembly as shown in the illustration.

  4. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 5 screws.

  5. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 5 screws.

  6. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect each connector.

    2. Engage the 6 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.

    3. Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.

  7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. for Blank Type:


      1. A01EX5P

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. Connect each connector.

      2. A01EUCV

        Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.

  8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. A01ETDJ

      Engage the 4 clips to install the No. 2 instrument panel register assembly.

      Note

      When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

  9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EWUZ

      Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.

  10. INSTALL FRONT PANEL GARNISH LH


    1. A01ETI1

      Engage the 3 clips and 8 guides to install the front panel garnish LH.

  11. INSTALL FRONT PANEL GARNISH RH


    1. A01EYF4

      Engage the 3 clips and 8 guides to install the front panel garnish RH.