RADIO RECEIVER REMOVAL


  1. REMOVE FRONT PANEL GARNISH LH


    1. A01EXDU

      Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.

  2. REMOVE FRONT PANEL GARNISH RH


    1. A01EYBQ

      Disengage the 3 clips and 8 guides to remove the front panel garnish RH.

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01ETO0

      Using a moulding remover, pry up on the center instrument cluster finish panel sub-assembly until there is enough of a gap to make it possible to pull on the panel by hand.

    2. A01EVW2

      Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 7 clips and 2 guides to remove the center instrument cluster finish panel sub-assembly as shown in the illustration.

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EUQP

      Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 4 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 2 instrument panel register assembly.

  5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    1. for Blank Type:


      1. A01EVN1

        Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. A01EY7R

        Disengage the 2 claws as shown in the illustration.

      2. Disconnect the each connector to remove the front console upper panel garnish.

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EXQHE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. A01EXK8

      Remove the 4 bolts.

    3. A01EU7P

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 6 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

  7. REMOVE NO. 1 RADIO BRACKET


    1. A01EVJD

      Remove the 5 screws and No. 1 radio bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. A01ETVH

      Remove the 5 screws and No. 2 radio bracket.

  9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EV9M

      Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.

  10. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

  11. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)