AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD

   
   

   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD

   
   

   NG

   CD IS FAULTY

   OK

2. CHECK CD

   
   

   1. 

      Check the CD.

      OK
      The CD is clean.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Tech Tips

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   
   

   NG

   CLEAN CD

   OK

3. REPLACE CD AND RECHECK

   
   

   1. Replace the CD with a known good one and recheck that the malfunction disappears.

      OK
      Malfunction disappears.

   
   

   NG

   CHECK RADIO RECEIVER ASSEMBLY Click here

   OK

   CD WAS FAULTY

4. CHECK RADIO RECEIVER ASSEMBLY

   
   

   1. Check the radio receiver assembly installation condition.

      
      

      1. Check that the radio receiver assembly is properly installed.

         OK
         Radio receiver assembly is properly installed.

   
   

   NG

   REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY Click here

   OK

   REPLACE RADIO RECEIVER ASSEMBLY Click here