TILT AND TELESCOPIC MANUAL SWITCH REMOVAL


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. A01ETA1E01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable sub-assembly.

    4. A01EVJQE01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE LOWER STEERING COLUMN COVER


    1. A01ETMW

      Remove the 3 screws.

    2. A01EWTM

      Push the right and left sides of the lower steering column cover, and disengage the 2 claws to remove the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

  5. REMOVE TILT AND TELESCOPIC SWITCH


    1. A01ET2Y

      Disconnect the connector.

    2. Disengage the claw and pull out the tilt and telescopic switch.

      Note

      Pushing on the claw too hard will break the claw.