MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Driver Side Knee Airbag)


    1. A01EYU6

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (w/o Driver Side Knee Airbag)


    1. A01EVAC

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (w/o Driver Side Knee Airbag)


    1. A01ET1F

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH (w/o Driver Side Knee Airbag)


    1. A01EWTC

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. A01EW81

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (w/o Driver Side Knee Airbag)


    1. A01EXTH

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  6. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)


    1. A01ETM3

      Remove the 2 bolts <B>.

    2. w/o Driver Side Knee Airbag:


      1. A01EVFO

        Disengage the 5 clips and 3 guides to remove the instrument panel sub-assembly.

    3. w/ Driver Side Knee Airbag:


      1. A01EVDY

        Disengage the 4 claws, 7 clips and 3 guides to remove the instrument panel sub-assembly.

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

    Click here

  8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A01EUQB

      Disconnect the connector from the multiplex tilt and telescopic ECU.

    2. Disengage the wire harness clamp.

    3. A01EVBD

      Disengage the claw to remove the multiplex tilt and telescopic ECU from the steering column assembly.