STEERING PAD SWITCH INSTALLATION


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. w/ Shift Paddle Switch Wire of Steering Pad Switch Assembly:


      1. Engage the clamp.

    4. Connect the steering pad switch connector to the spiral cable sub-assembly.

    5. A01ET6R

      Pass the wire harness over the 2 guides.

  2. INSTALL HORN BUTTON ASSEMBLY

    Click here