STEERING PAD SWITCH INSTALLATION


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. Engage the claw and 2 pins to install the steering pad switch assembly (RH side) to the steering wheel sub-assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Engage the claw and 2 pins to install the steering pad switch assembly (LH side) to the steering wheel sub-assembly.

    4. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    5. Connect the steering pad switch connector to the spiral cable.

    6. A01EY67

      Pass the wire harness over the 2 guides.

  2. INSTALL HORN BUTTON ASSEMBLY

    Click here