STEERING PAD SWITCH REMOVAL


  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable.

    2. A01EVU8

      Remove the 2 screws.

    3. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.

    4. A01ET7T

      Remove the 2 screws.

    5. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.