STEERING WHEEL REMOVAL

Note

Do not replace the spiral cable with the battery connected and the ignition switch ON.
Do not rotate the spiral cable without the steering wheel with the battery connected and the ignition switch ON.
Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
REMOVE HORN BUTTON ASSEMBLY

Click here
REMOVE STEERING WHEEL ASSEMBLY
1. Text in Illustration
  
  *a Matchmark
  
  Remove the steering wheel assembly set nut.
2. Put matchmarks on the steering wheel assembly and steering main shaft.
3. Disconnect the connectors from the spiral cable.
4. Text in Illustration
  
  *a Turn
  
  *b Hold
  
  Using SST, remove the steering wheel assembly.
  
  SST
  
  09950-50013 ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )
  
  Note
  
  Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.
REMOVE STEERING PAD SWITCH ASSEMBLY
1. Disconnect the steering pad switch connector from the spiral cable.
2. Remove the 2 screws.
3. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.
4. Remove the 2 screws.
5. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.
REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)
1. Remove the 2 screws.
2. Disconnect the connector and remove the cruise control main switch.
REMOVE CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)
1. Remove the cruise control switch wire.
REMOVE LOWER STEERING WHEEL BOSS COVER
1. Disengage the 6 claws and 2 guides to remove the lower steering wheel boss cover from the steering wheel sub-assembly.
REMOVE STEERING SHAKE DAMPER
1. Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.

Text in Illustration
*a	Turn
*b	Hold