FRONT BRAKE REASSEMBLY


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the front disc brake bleeder plug after bleeding.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A01EU82

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

      Text in Illustration
      A01EVDL Lithium Soap Base Glycol Grease

    2. Install the piston seal to the front disc brake cylinder.

      Note

      Securely install the piston seal to the groove of the front disc brake cylinder.

  4. INSTALL FRONT DISC BRAKE PISTON


    1. A01EXLRE01
      Text in Illustration
      *1 Cylinder Boot
      *2 Front Disc Brake Piston
      A01EVDL Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

    2. Install the cylinder boot to the front disc brake piston.

    3. Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

      Note

      Do not install the front disc brake piston forcibly in the front disc brake cylinder.

  5. INSTALL CYLINDER BOOT


    1. A01EUUIE01
      Text in Illustration
      *1 Front Disc Brake Piston Set Ring
      *2 Cylinder Boot

      Install the cylinder boot to the front disc brake cylinder.

      Note

      Securely install the cylinder boot to the groove of the front disc brake cylinder and front disc brake piston.

    2. A01EY7EE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver, install a new front disc brake piston set ring.

      Note


      • Securely install the front disc brake piston set ring to the outer groove of the cylinder boot.

      • Do not damage the cylinder boot.