PARKING BRAKE CABLE REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Click here

  2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Click here

  3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A01EU5J

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. A01EYJK

      Remove the adjusting nut.

    3. A01EW5J

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A01EX0D

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. A01EX5E

      Remove the adjusting nut.

    3. A01EU4Q

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  5. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A01EXX1E01
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. A01EWFNE01
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY


  7. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. for 2AR-FE, 1AZ-FE:


      1. A01ETNW

        Remove the 3 nuts and front No. 2 floor heat insulator.

  8. SEPARATE PARKING BRAKE SHOE LEVER

    Click here

  9. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)


    1. A01EU3L

      Remove the 2 clips.

      Text in Illustration
      A01EUL1 Nut (attached to under cover)

    2. Disengage the 6 nuts and remove the No. 2 floor under cover.

      Tech Tips

      The 6 nuts will remain attached to the No. 2 floor under cover.

  10. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)


    1. A01ETRY

      Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.

      Text in Illustration
      A01EUL1 Nut (attached to under cover)

      Tech Tips

      Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.

  11. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01ETVJ

      Remove the clip from the No. 3 parking brake cable assembly.

    2. A01ESXS

      Remove the 2 bolts and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      A01EVOX

  12. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.