BRAKE MASTER CYLINDER (for RHD) REASSEMBLY


  1. INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.

    2. Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir sub-assembly.

  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Install the brake master cylinder reservoir sub-assembly to the brake master cylinder assembly.

  3. INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note


      • Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

      • Do not drop the brake master cylinder reservoir sub-assembly.

    2. A01ESW3

      Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir sub-assembly.

  4. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

  5. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY