BRAKE PEDAL (for RHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Tech Tips

    Use the same procedure for LHD and RHD Click here.

  2. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01EXRY

      Disconnect the connector.

    2. A01EYNJ

      Turn the stop light switch assembly counterclockwise and remove it.

  3. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  4. REMOVE PUSH ROD PIN


    1. A01EXBQ

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  5. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01ETRW

      Remove the brake pedal return spring from the brake pedal support assembly.

  6. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01EURF

      Disconnect the brake pedal load sensing switch connector.

    2. A01EXW4

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01ET94

      Remove the 4 nuts and brake pedal support assembly.