VSC OFF SWITCH REMOVAL


  1. REMOVE NO. 1 SWITCH HOLE BASE


    1. A01EWU8E01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the areas shown in the illustration.

    2. Using a moulding remover, disengage the 4 claws and 2 guides as shown in the illustration.

    3. Disconnect the connector and remove the No. 1 switch hole base.

  2. REMOVE VEHICLE STABILITY CONTROL SWITCH (for LHD)


    1. A01EX6E

      Disengage the 2 claws to remove the vehicle stability control switch.

  3. REMOVE VEHICLE STABILITY CONTROL SWITCH (for RHD)


    1. A01EV2G

      Disengage the 2 claws to remove the vehicle stability control switch.