REAR STABILIZER BAR REMOVAL


  1. REMOVE REAR WHEELS

  2. REMOVE NO. 2 FLOOR UNDER COVER


    1. A01EU3L

      Remove the 2 clips.

      Text in Illustration
      A01EUL1 Nut (attached to under cover)

    2. Disengage the 6 nuts and remove the No. 2 floor under cover.

      Tech Tips

      The 6 nuts will remain attached to the No. 2 floor under cover.

  3. REMOVE NO. 1 FLOOR UNDER COVER


    1. A01ETRY

      Disengage the 5 nuts and 2 clips, and remove the No. 1 floor under cover.

      Text in Illustration
      A01EUL1 Nut (attached to under cover)

      Tech Tips

      Rotate the clips to disengage them. The 5 nuts and 2 clips will remain attached to the No. 1 floor under cover.

  4. REMOVE REAR STABILIZER LINK ASSEMBLY LH


    1. A01EW39

      Remove the nut and separate the rear stabilizer link assembly LH from the rear shock absorber assembly.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

    2. A01ET18

      Remove the nut and rear stabilizer link assembly LH from the rear stabilizer bar.

      If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.

  5. REMOVE REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  6. REMOVE REAR STABILIZER BAR


    1. A01ETE4

      Remove the 4 bolts, rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings.

  7. REMOVE REAR NO. 1 STABILIZER BAR BRACKET


    1. Remove the 2 rear No. 1 stabilizer bar brackets from the rear stabilizer bar.

  8. REMOVE REAR STABILIZER BUSHING


    1. Remove the 2 rear stabilizer bushings from the rear stabilizer bar.