FRONT STABILIZER BAR INSTALLATION


  1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING


    1. A01EVKDE01
      Text in Illustration
      *a Cutout
      A01EUL1 Front of the Vehicle
      A01ETOA Inside of the Vehicle

      Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

      Note

      When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.

  2. INSTALL FRONT STABILIZER BAR


    1. Install the front stabilizer bar to the front frame assembly.

  3. INSTALL FRONT NO. 1 STABILIZER BRACKET LH


    1. Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }

  4. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. for Steel Type:


      1. A01EX1S

        Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.

        Torque:
        74 N*m  { 755 kgf*cm, 55 ft.*lbf }

        If the ball joint turns together with the nut, use a hexagon wrench to hold the stud bolt.

    2. for Aluminum Type:


      1. A01EXUX

        Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.

        Torque:
        74 N*m  { 755 kgf*cm, 55 ft.*lbf }

        If the ball joint turns together with the nut, use a wrench to hold the stud bolt.

  6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  7. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

    for 2AR-FE: Click here

    for 2GR-FE: Click here