FRONT DRIVE SHAFT ASSEMBLY (for 2AR-FE) INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01EYP7

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. A01EU3ME01
      Text in Illustration
      *A LH Side
      *B RH Side

      Check whether the drive shaft dimensions (A) are within the following specifications.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A)
      for TMC Made except TMC Made
      LH Side 585.2 mm (1.92 ft.) 587.4 mm (1.93 ft.)
      RH Side 910.0 mm (2.99 ft.) 906.6 mm (2.97 ft.)