DIFFERENTIAL CASE DISASSEMBLY


  1. REMOVE FRONT DIFFERENTIAL RING GEAR


    1. A01EXLLE07
      Text in Illustration
      *a Matchmark

      Put matchmarks on the front differential ring gear and front differential case.

    2. A01ESW7

      Remove the 12 bolts.

    3. A01EXUZ

      Using a plastic hammer, tap on the front differential ring gear to remove it from the front differential case.

  2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    1. A01EUS3E09
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front differential case front tapered roller bearing from the front differential case.

      SST
      09950-00020
      09950-00030
      09950-40011   ( 09957-04010 )
      09950-60010   ( 09951-00480 )
    2. A01EV0EE01

      Using SST, remove the front differential case front tapered roller bearing (outer race) and shim from the transaxle housing.

      SST
      09308-00010

  3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    1. A01ETIDE08
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the front differential case rear tapered roller bearing from the front differential case.

      SST
      09950-00020
      09950-00030
      09950-40011   ( 09957-04010 )
      09950-60010   ( 09951-00480 )
    2. A01EYQ0E01

      Using SST, remove the front differential case rear tapered roller bearing (outer race) from the transaxle case.

      SST
      09308-00010

  4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    1. A01EXAKE01

      Using SST and a hammer, loosen the staked part of the differential case.

      SST
      09930-00010
    2. A01EXP0

      Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the differential case.

      Note

      Before removing the front differential pinion shaft straight pin, unstake it with a pin punch.

  5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


    1. A01EWIY

      Remove the front No. 1 differential pinion shaft from the differential case.

  6. REMOVE DIFFERENTIAL SIDE GEAR


    1. A01EXY1

      Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 No. 1 front differential side gear thrust washers from the differential case.

  7. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    1. A01EUQAE01

      Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.

      SST
      09950-60010   ( 09951-00550 )
      09950-70010   ( 09951-07200 )

  8. REMOVE TRANSAXLE CASE OIL SEAL


    1. A01EXO0E01

      Using SST and a hammer, remove the transaxle case oil seal from the transaxle case.

      SST
      09950-60010   ( 09951-00650 )
      09950-70010   ( 09951-07100 )