TRANSMISSION WIRE REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01EX6WE01

      Remove the 18 bolts, automatic transaxle oil pan sub-assembly and gasket from the automatic transaxle assembly.

      Note

      Some fluid will remain in the automatic transaxle oil pan sub-assembly.

      Remove all the automatic transaxle oil pan sub-assembly bolts, and carefully remove the automatic transaxle oil pan sub-assembly.

    2. Remove the 2 magnets from the automatic transaxle oil pan sub-assembly.

    3. A01EU2I

      Examine the particles in the automatic transaxle oil pan sub-assembly.


      1. Collect any steel chips using the removed magnets.

        Carefully inspect the foreign matter and particles in the automatic transaxle oil pan sub-assembly and on the magnets to see the type of wear which might be found in the automatic transaxle assembly.

        Steel (magnetic): bearing, gear and clutch plate wear

        Brass (non-magnetic): bushing wear

  3. REMOVE TRANSMISSION WIRE


    1. A01EWM2E09
      Text in Illustration
      *1 Lock Plate

      Disconnect the 5 connectors from the transmission valve body assembly.

    2. Remove the bolt, lock plate and ATF temperature sensor.

    3. A01EWDG

      Remove the bolt and transmission wire from the automatic transaxle assembly.

    4. A01EXQ4E03

      Remove the O-ring from the transmission wire.