PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01EYRJE05
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Shift Position Specified Condition
      4 (B) - 5 (L) P and N Below 1 Ω
      Except P and N 10 kΩ or higher
      2 (RB) - 6 (PL) P Below 1 Ω
      Except P 10 kΩ or higher
      2 (RB) - 1 (RL) R Below 1 Ω
      Except R 10 kΩ or higher
      2 (RB) - 9 (NL) N Below 1 Ω
      Except N 10 kΩ or higher
      2 (RB) - 7 (DL) D, S, "+" and "-" Below 1 Ω
      Except D, S, "+" and "-" 10 kΩ or higher

      If the resistance value is not as specified, replace the park/neutral position switch assembly.