STARTER DISASSEMBLY


  1. REMOVE REPAIR SERVICE STARTER KIT


    1. A01EYPS

      Remove the nut and disconnect the lead wire from the magnet switch.

    2. A01ETW3

      Holding the magnet switch to the starter drive housing, remove the 2 screws.

    3. Remove the magnet switch.

    4. Remove the return spring and plunger from the starter drive housing.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01EWL7

      Remove the 2 through-bolts, and pull out the starter yoke assembly together with the starter commutator end frame assembly.

    2. A01ET52

      Remove the starter yoke assembly from the starter commutator end frame assembly.

  3. REMOVE STARTER ARMATURE PLATE


    1. A01EW5N

      Remove the armature plate from the starter yoke assembly.

  4. REMOVE STARTER COMMUTATOR END FRAME COVER


    1. A01EVZ1

      Using a screwdriver, pry out the commutator end frame cover.

  5. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01EWSNE09
      Text in Illustration
      *1 Snap Ring Pliers

      Using snap ring pliers, remove the snap ring and washer.

      Note

      Do not drop the starter armature assembly.

    2. Remove the starter armature assembly from the starter commutator end frame assembly.

  6. REMOVE PLANETARY GEAR


    1. A01EXTR

      Remove the 3 planetary gears from the starter drive housing.