STARTER (for 1.6 kW Type) INSTALLATION

INSTALL BATTERY

1. Install the battery and battery tray.

2. Install the battery clamp with the bolt and nut.

   Torque:

   Bolt

   9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   Nut

   3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

3. Connect the positive (+) battery terminal

   Torque:

   6.9 N*m  { 70 kgf*cm, 61 in.*lbf }

INSTALL AIR CLEANER CASE SUB-ASSEMBLY

1. 

   Text in Illustration

   *a	Wire harness clamp
   *b	Hole
   *c	Projection

   Insert the projection of the air cleaner case sub-assembly to the hole of the No. 2 air cleaner bracket as shown in the illustration.

2. Tighten the 2 bolts.

   Torque:

   5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

3. Connect the wire harness clamp.

INSTALL AIR CLEANER CAP SUB-ASSEMBLY

1. Install the air cleaner cap sub-assembly with the 2 clamps.

2. Install the air cleaner hose with the hose clamp.

3. Connect the ventilation hose to the cylinder head cover.

4. Install the fuel vapor feed hose to the air cleaner hose.

5. Connect the mass air flow meter connector and 2 wire harness clamps to the air cleaner cap sub-assembly.

6. Connect the vacuum switching valve assembly to the air cleaner hose.

INSTALL INLET AIR CLEANER ASSEMBLY

1. Install the inlet air cleaner with the 2 bolts.

   Torque:

   8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

1. Fit the 3 retainers and install the No. 1 engine cover sub-assembly.

INSTALL COOL AIR INTAKE DUCT SEAL

1. Install the cool air intake duct seal with the 9 clips.