EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER LH

  4. REMOVE ENGINE UNDER COVER RH

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01EYDR

      Disconnect the oxygen sensor connector.

    2. A01EXZP

      Remove the 2 bolts, 2 nuts, 2 compression springs and front exhaust pipe assembly.

    3. Remove the 2 gaskets from the front exhaust pipe assembly and exhaust manifold converter sub-assembly.

  6. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01ETBH

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator.

  7. REMOVE AIR FUEL RATIO SENSOR


    1. A01ET2R

      Remove the hose clamp.

    2. Disconnect the air fuel ratio sensor connector.

    3. A01EZ42E01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

      SST
      09224-00010

  8. REMOVE MANIFOLD STAY


    1. A01EVWM

      Remove the bolt, nut and manifold stay.

  9. REMOVE NO. 2 MANIFOLD STAY


    1. A01EY28

      Remove the bolt, nut and No. 2 manifold stay.

  10. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01EVVI

      Using a 12 mm deep socket wrench, remove the 5 nuts and exhaust manifold converter sub-assembly.

    2. A01EXKD

      Remove the exhaust manifold to head gasket from the cylinder head sub-assembly.

  11. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01EUKA

      Remove the 2 bolts and No. 2 exhaust manifold heat insulator.

  12. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01EV2A

      Remove the 4 bolts and No. 1 manifold converter insulator.