PCV VALVE INSTALLATION


  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


    1. Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent

    2. Using a ball joint lock nut wrench (22 mm), install the ventilation valve sub-assembly.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Click here.

  2. CONNECT NO. 2 VENTILATION HOSE


    1. Connect the No. 2 ventilation hose to the ventilation valve sub-assembly.

  3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. Install the No. 1 engine cover sub-assembly with the 2 nuts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }