POWER MIRROR CONTROL SYSTEM (w/o Memory) PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.

    System Name See Procedure
    Parking Assist Monitor System

    Click here

  2. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START Start

  3. PRECAUTIONS WHEN USING INTELLIGENT TESTER


    1. When using the intelligent tester with the ignition switch off to troubleshoot:

      Connect the intelligent tester to the vehicle, and turn a courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and the vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.