HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT WHEEL LH (for LHD)

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE FRONT FENDER LINER LH (for LHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. REMOVE FRONT WHEEL RH (for RHD)

  6. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)


    1. A01EUXK

      Remove the 3 screws and front wheel opening extension pad RH.

  7. REMOVE FRONT FENDER LINER RH (for RHD)


    1. A01EUP1

      Remove the clip.

    2. A01EVJYE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

    3. A01EUCCE01
      Text in Illustration
      *1 Grommet

      Remove the 5 screws.

    4. Remove the 4 clips, 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  8. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)


    1. A01EYU6

      Disengage the 10 claws and remove the front door scuff plate LH.

  9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)


    1. A01EVAC

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  10. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  11. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  12. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01EXTH

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  13. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01EY2K

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  14. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. A01EYFOE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01ETKR

      Disconnect the connector.

    3. A01EVP4E01
      Text in Illustration
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. A01ETNV

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  15. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. A01EXTEE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the hood lock nut cap.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01ETTY

      Disconnect the connector.

    3. A01EVCME01
      Text in Illustration
      *1 Hood Lock Bolt

      Remove the 2 bolts and hood lock bolt.

    4. A01EYXC

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  16. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, disengage the 5 clamps and hood cable grommet as shown in the illustration.

      A01EWK4E01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Hood Cable Grommet
      *3 Washer Hose *4 Hood Lock Control Cable Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

  17. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, disengage the 4 clamps and hood cable grommet as shown in the illustration.

      A01EVW7E01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Hood Cable Grommet
      *3 Washer Hose *4 Hood Lock Control Cable Clamp

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.