SLIDING ROOF SYSTEM Remote Control System does not Operate

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear sub-assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear sub-assembly) receives those signals and activates the sliding roof motor.

INSPECTION PROCEDURE

Note


  • The sliding roof key-linked function and sliding roof wireless transmitter-linked function can be customized. Make sure that both functions are ON Click here.

  • When the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized Click here.

  • Since the sliding roof system has functions that use LIN communication, first confirm that there is no malfunction in the LIN communication system with the How to Proceed with Troubleshooting procedure Click here.

  • When sliding roof ECU (sliding roof drive gear sub-assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear sub-assembly) DTC.

PROCEDURE


  1. CHECK REMOTE CONTROL FUNCTION


    1. Check the key-linked and wireless transmitter-linked function Click here.

      Result
      Result Proceed to
      The roof glass does not operate by the key-linked or wireless transmitter-linked function, but the window glass operate. A
      Both the window glass and roof glass do not operate by the key-linked or wireless transmitter-linked function. B
      Both the window glass and roof glass operate by the key-linked and wireless transmitter-linked function. C

    B

    GO TO POWER WINDOW CONTROL SYSTEM Click here

    C

    USE SIMULATION METHOD TO CHECK Click here

    A

  2. CHECK SLIDING ROOF OPERATION


    1. Check the sliding roof operation Click here.

      OK
      Sliding roof operation operates normally.

    NG

    GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control) Click here

    OK

  3. REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)


    1. Replace the sliding roof ECU (sliding roof drive gear sub-assembly) Click here.


    NEXT

  4. INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY)


    1. Initialize the sliding roof ECU (sliding roof drive gear sub-assembly) Click here.


    NEXT

  5. CHECK REMOTE CONTROL FUNCTION


    1. Check the key-linked and wireless transmitter-linked function Click here.

      OK
      The key-linked and wireless transmitter-linked function operates normally.

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here

    OK

    END (SLIDING ROOF ECU WAS DEFECTIVE)