INSTRUMENT PANEL SAFETY PAD REASSEMBLY


  1. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY


    1. A01EXOD

      Engage the 14 clips.

    2. A01EU2H

      Install the No. 2 instrument panel garnish sub-assembly with the 2 screws <C>.

  2. INSTALL NO. 2 HEATER TO REGISTER DUCT


    1. A01EUU4

      Install the No. 2 heater to register duct with the 2 screws <C>.

  3. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    1. Engage the 2 clamps.

    2. Install the navigation antenna assembly with the 2 screws.

  4. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. A01EXL8

      Engage the 2 guides.

    2. Install the defroster nozzle assembly with the 3 screws <C>.

  5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. Engage the 8 clamps to install the antenna cord sub-assembly.

  6. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. Engage the 10 clamps to install the antenna cord sub-assembly.

  7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    1. A01EY3H

      Engage the 2 claws.

    2. Install the No. 2 side defroster nozzle duct with the screw <C>.

  8. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    1. A01EYB2

      Engage the 2 claws.

    2. Install the No. 1 side defroster nozzle duct with the screw <C>.

  9. INSTALL ION GENERATOR ASSEMBLY (w/ Ion Generator)


    1. Install the ion generator assembly with the 3 screws.

  10. INSTALL NO. 3 HEATER TO REGISTER DUCT (for LHD)


    1. A01EWLE

      Install the No. 3 heater to register duct with the 3 screws <C>.

    2. Install the clip.

  11. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for RHD)


    1. Engage the heater to register duct assembly to the ion generator assembly.

    2. A01EUK2

      Install the heater to register duct assembly with the 3 screws <C>.

    3. Install the clip.

  12. INSTALL NO. 1 HEATER TO REGISTER DUCT (except LHD with Ion Generator)


    1. A01EUC0

      Install the No. 1 heater to register duct with the 3 screws <C>.

    2. Install the clip.

  13. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for LHD with Ion Generator)


    1. Engage the heater to register duct assembly to the ion generator assembly.

    2. A01EW2N

      Install the heater to register duct assembly with the 3 screws <C>.

    3. Install the clip.

  14. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Note

    If the hooks are not engaged in the correct order, the deployment part of the instrument panel passenger airbag assembly may be damaged.


    1. A01EWE6

      Engage the 3 hooks as shown in the illustration.

    2. Push the instrument panel passenger airbag assembly to engage the 3 hooks.

    3. Install the 2 screws to install the instrument panel passenger airbag assembly.

  15. INSTALL NO. 1 INSTRUMENT PANEL PIN


    1. Install the 4 No. 1 instrument panel pins with the 4 screws <C>.

      A01EU0W