REAR POWER OUTLET SOCKET INSTALLATION


  1. INSTALL REAR POWER OUTLET SOCKET COVER


    1. A01EXOX

      Engage the 2 claws to install the rear power outlet socket cover as shown in the illustration.

  2. INSTALL REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY


    1. A01EUPM

      Engage the claw to install the rear No. 1 power outlet socket assembly as shown in the illustration.

    2. Connect the connector.

    3. A01ETUB

      Engage the 3 clamps to install the rear seat center armrest cover to its original position as shown in the illustration.

    4. Engage the clamp.

  3. INSTALL COOLER CONTROL SWITCH ASSEMBLY


    1. Set the rear seat armrest plate to the rear seat center armrest box assembly.

    2. Connect each connector to the cooler control switch assembly.

    3. Engage the 4 claws to install the cooler control switch assembly.

    4. Engage the 3 guides and 8 claws.

    5. Install the rear seat armrest plate with the screw.

    6. Insert the guide.

    7. Install the rear seat center armrest door sub-assembly with the 2 screws.

  4. INSTALL REAR SEAT CENTER ARMREST BOX ASSEMBLY


    1. A01ESTS

      Engage the 4 hooks to install the rear seat center armrest box assembly to the rear seat center armrest assembly.

  5. INSTALL CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY


    1. A01EYP1

      Install the center seat armrest bracket sub-assembly with the 2 bolts and 2 washers.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Engage the 3 clamps.

  6. INSTALL REAR CENTER SEATBACK FRAME WITH COVER AND PAD


    1. A01EU9R

      Engage the 2 claws.

    2. Install the rear center seatback frame with cover and pad with the 2 nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  7. INSTALL CENTER SEAT ARMREST INNER PLATE


    1. A01EX0A

      Insert the 4 guides and engage the 6 claws to install the center seat armrest inner plate.

  8. INSTALL CENTER SEATBACK ASSEMBLY


    1. Place the center seatback assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Engage the hook.

    3. Install the center seatback assembly with the 2 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    4. Connect the connector.

  9. INSTALL REAR SEATBACK ASSEMBLY LH


    1. Place the rear seatback assembly LH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly LH with the 2 bolts and 2 nuts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    3. Engage the 2 hooks to install the cover.

    4. Connect the 2 rear seat belts to the 2 rear seat shoulder belt guides.

    5. w/ Rear Seat Side Airbag:


      1. Connect each connector and clamp to the child restraint anchor bracket sub-assembly LH.

  10. INSTALL REAR SEATBACK ASSEMBLY RH


    1. Place the rear seatback assembly RH in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Install the rear seatback assembly RH with the 2 bolts and 2 nuts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    3. Engage the 2 hooks to install the cover.

    4. Connect the rear seat belt to the rear seat shoulder belt guide.

    5. w/ Rear Seat Side Airbag:


      1. Connect each connector and clamp to the child restraint anchor bracket sub-assembly RH.

  11. INSTALL REAR SEATBACK COVER


    1. Engage the 4 claws to install the 2 rear seatback covers.

      Tech Tips

      Use the same procedure as for the LH side.

  12. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A01EVL5

      Engage the claw to install a new rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure as for the LH side.

  13. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. w/ Seat Heater System:


      1. Connect the 2 seat heater connectors.

    3. A01EX1E

      Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.

    4. Confirm that the rear seat cushion assembly is firmly installed.

      Note

      When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the seat cushion assembly.

  14. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

  15. INSTALL REAR SEAT HEADREST ASSEMBLY

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  17. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    for Separate Type Yaw Rate Sensor: Click here

    for Built-in Type Yaw Rate Sensor: Click here