AIR CONDITIONING AMPLIFIER REMOVAL


  1. PRECAUTION (for LHD)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for LHD)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR SCUFF PLATE

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  6. REMOVE INSTRUMENT SIDE PANEL

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  7. REMOVE FRONT PANEL GARNISH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ETM9

      Disengage the 4 claws.

    2. Disengage the 2 guides.

    3. Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.

  9. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01EY0O

      Remove the bolt <B> and screw <C>.

    2. Open the lower instrument panel door.

    3. A01ET98

      Remove the 3 screws <C>.

    4. A01ETI0

      Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.

  10. REMOVE ECU INTEGRATION BOX RH (for LHD)


    1. for LHD:


      1. Disconnect each connector.

      2. A01EWHE

        Remove the bolt, 2 nuts and ECU integration box RH.

    2. for RHD:


      1. Disconnect each connector.

      2. A01EYM0

        Remove the bolt, 2 nuts and ECU integration box RH.

  11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    1. Disconnect each connector.

    2. for LHD:


      1. A01EVRM

        Remove the 2 screws.

      2. Disengage the 2 guides and remove the air conditioning amplifier assembly.

    3. for RHD:


      1. A01EUE2

        Remove the 2 screws.

      2. Disengage the 2 guides and remove the air conditioning amplifier assembly.