CHILD RESTRAINT SEAT ANCHOR BRACKET REMOVAL


  1. PRECAUTION (w/ Rear Seat Side Airbag)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)


    1. A01EYIPE01

      Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)


    1. A01EZ1N

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  5. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fold Down Seat Type)

  6. REMOVE REAR SEATBACK ASSEMBLY LH (for Fold Down Seat Type)


    1. Disconnect the rear seat outer belt from the rear seat center shoulder belt guide.

    2. Fold down the rear seatback assembly LH.

    3. A01EWORE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    4. A01EX24

      Remove the 2 bolts and rear seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fold Down Seat Type)

  8. REMOVE REAR SEATBACK ASSEMBLY RH (for Fold Down Seat Type)


    1. Fold down the rear seatback assembly RH.

    2. A01EYWVE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    3. A01EV2K

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  9. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)


    1. A01EWH4E01

      Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat the step above for the other hook.

    2. w/ Seat Heater System:


      1. Disconnect the 2 seat heater connectors.

    3. Remove the rear seat cushion assembly.

  10. REMOVE REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)


    1. A01EZ1N

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure as for the LH side.

  11. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)

  12. REMOVE REAR SEATBACK COVER (for Reclining Seat Type)


    1. A01EUWN

      Disengage the 4 claws and remove the 2 rear seatback covers.

      Tech Tips

      Use the same procedure as for the LH side.

  13. REMOVE REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)


    1. w/ Rear Seat Side Airbag:


      1. Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.

    2. Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.

    3. A01EVHV

      Disengage the 2 hooks and disconnect the cover.

    4. Remove the 2 nuts, 2 bolts and rear seatback assembly LH.

  14. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)

  15. REMOVE REAR SEATBACK COVER (for Reclining Seat Type)


    1. A01EUWN

      Disengage the 4 claws and remove the 2 rear seatback covers.

      Tech Tips

      Use the same procedure as for the LH side.

  16. REMOVE REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type)


    1. w/ Rear Seat Side Airbag:


      1. Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly RH.

    2. Disengage the rear seat belt from the rear seat shoulder belt guide.

    3. A01EUMS

      Disengage the 2 hooks and disconnect the cover.

    4. Remove the 2 nuts, 2 bolts and rear seatback assembly RH.

  17. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. A01EW7GE01
      Text in Illustration
      *A for Fold Down Seat Type
      *B

      for Reclining Seat Type

      w/o Seat Heater System
      *C

      for Reclining Seat Type

      w/ Seat Heater System

      Remove the 2 nuts and child restraint seat anchor bracket sub-assembly LH.

  18. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH


    1. A01EYWLE01
      Text in Illustration
      *A for Fold Down Seat Type
      *B

      for Reclining Seat Type

      w/o Seat Heater System
      *C

      for Reclining Seat Type

      w/ Seat Heater System

      Remove the 2 nuts and child restraint seat anchor bracket sub-assembly RH.