REAR SEAT RECLINING CONTROL CABLE REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01EYIPE01

      Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  3. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A01EZ1N

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the LH side and RH side.

  4. REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt from the rear seat shoulder belt guide LH.

    2. A01EY53

      Remove the bolt.

    3. Disengage the hook and remove the rear side seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  5. REMOVE REAR SIDE SEATBACK ASSEMBLY RH


    1. Disconnect the rear seat outer belt from the rear seat shoulder belt guide RH.

    2. A01EXK1

      Remove the bolt.

    3. Disengage the hook and remove the rear side seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt from the rear seat center shoulder belt guide.

    2. Fold down the rear seatback assembly LH.

    3. A01EWORE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    4. A01EX24

      Remove the 2 bolts and rear seatback assembly LH.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold down the rear seatback assembly RH.

    2. A01EYWVE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    3. A01EV2K

      Remove the 2 bolts and rear seatback assembly RH.

      Note

      Be careful not to damage the vehicle body.

  8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Disconnect the rear door opening trim weatherstrip LH.

  9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH


    1. Disconnect the rear door opening trim weatherstrip RH.

  10. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side)


    1. A01EYH8

      Remove the bolt and disconnect the floor anchor of the rear seat outer belt assembly.

  11. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side)


    1. A01EXY3

      Remove the bolt and disconnect the floor anchor of the rear seat outer belt assembly.

  12. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. A01EW7GE01
      Text in Illustration
      *A for Fold Down Seat Type
      *B

      for Reclining Seat Type

      w/o Seat Heater System
      *C

      for Reclining Seat Type

      w/ Seat Heater System

      Remove the 2 nuts and child restraint seat anchor bracket sub-assembly LH.

  13. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    1. A01EW3F

      Remove the bolt and disconnect the floor anchor of the rear seat inner with center belt assembly LH.

  14. REMOVE ROOF SIDE INNER GARNISH LH


    1. A01EXPK

      Disengage the 5 clips.

    2. Disengage the guide and remove the roof side inner garnish LH.

  15. REMOVE ROOF SIDE INNER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade)


    1. A01EXDXE01

      Slide the center stop light set in the order and directions shown by the arrows in the illustration while pushing it towards the rear of the vehicle to disengage the 4 claws.

    2. A01ET7Q

      Turn the center stop light set 180 degrees as shown by the arrow in the illustration.

      Tech Tips

      This makes it easier to disconnect the connector.

    3. Disconnect the connector and remove the center stop light set.

  17. REMOVE REAR SEAT SHOULDER BELT COVER


    1. A01ET04

      Using a moulding remover, disengage the 2 claws and 4 guides and remove the rear seat shoulder belt cover.

      Tech Tips

      Use the same procedure for the other 2 rear seat shoulder belt covers.

  18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)


    1. A01EXA0E01
      Text in Illustration
      *1 Protective Tape

      Using pliers, disengage the 3 clips from inside the luggage compartment as shown in the illustration.

      Tech Tips

      Tape the tips of pliers before use.

    2. Disengage the 5 guides.

    3. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.

  19. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)


    1. A01EWD9E01
      Text in Illustration
      *1 Protective Tape

      Using pliers, disengage the 3 clips from inside the luggage compartment as shown in the illustration.

      Tech Tips

      Tape the tips of pliers before use.

    2. Disengage the guide.

    3. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly then remove the package tray trim panel assembly.

  20. REMOVE ROOM PARTITION BOARD LH


    1. A01EVJV

      Disengage the guide, 2 claws and 4 clips, and remove the room partition board LH.

  21. REMOVE ROOM PARTITION BOARD RH


    1. A01EUPR

      Using a clip remover, remove the 2 clips.

    2. Disengage the 5 clips, and remove the room partition board RH.

  22. REMOVE REAR SEATBACK LOCK ASSEMBLY LH (REAR SEAT LOCK CONTROL CABLE LH)


    1. A01EWQB

      Disengage the hook in the order indicated in the illustration.

    2. A01ETXG

      Remove the 2 nuts and rear seatback lock assembly LH (rear seat lock control cable LH).

  23. REMOVE REAR SEATBACK LOCK ASSEMBLY RH (REAR SEAT LOCK CONTROL CABLE RH)

    Tech Tips

    Use the same procedure as for the LH side.