REAR SEAT CUSHION HEATER (for Reclining Seat Type) INSTALLATION


  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER (REAR SEAT CUSHION HEATER SUB-ASSEMBLY)


    1. Temporarily install the bench type rear seat cushion cover (rear seat cushion heater sub-assembly) to the bench type rear seat cushion pad.

    2. Using hog ring pliers, install 24 new hog rings.

      A01ET4J

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    3. Using hog ring pliers, install the bench type rear seat cushion cover (rear seat cushion heater sub-assembly) to the bench type rear seat cushion pad with 40 new hog rings.

      A01EYUD

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A01EVL5

      Engage the claw to install a new rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure as for the LH side.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. w/ Seat Heater System:


      1. Connect the 2 seat heater connectors.

    3. A01EX1E

      Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.

    4. Confirm that the rear seat cushion assembly is firmly installed.

      Note

      When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the seat cushion assembly.