REAR SEAT CUSHION HEATER (for Fold Down Seat Type) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt assembly from the rear seat center shoulder belt guide.

    2. Fold down the rear seatback assembly LH.

    3. A01EW9GE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    4. w/o Seat Heater System:


      1. A01EWPN

        Remove the 2 bolts and rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

    5. w/ Seat Heater System:


      1. A01EWPN

        Remove the 2 bolts and disconnect the rear seatback assembly LH.

      2. A01EVU6

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

  3. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold down the rear seatback assembly RH.

    2. A01EYWVE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    3. w/o Seat Heater System:


      1. A01EV2K

        Remove the 2 bolts and rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

    4. w/ Seat Heater System:


      1. A01EV2K

        Remove the 2 bolts and disconnect the rear seatback assembly RH.

      2. A01EYEC

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A01EXQTE01

      Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.

      2. Repeat the step above for the other hook.

    2. w/ Seat Heater System:


      1. Disconnect the connector.

      2. A01EVEO

        Disengage the 2 clamps.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  5. REMOVE REAR SEAT CUSHION LOCK HOOK


    1. A01EZ1N

      Disengage the claw and remove the rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  6. REMOVE BENCH TYPE REAR SEAT CUSHION COVER (REAR SEAT CUSHION HEATER SUB-ASSEMBLY)


    1. Remove the 48 hog rings.

      A01EU28

    2. Remove the 24 hog rings and bench type rear seat cushion cover (rear seat cushion heater sub-assembly) from the bench type rear seat cushion pad.

      A01EY1A