FRONT SEAT CUSHION HEATER INSTALLATION


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01EVWF

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01EWK9

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. w/ Seat Heater System:


      1. Engage the 2 clamps to install the seat heater wire harness.

      2. Connect the connector.

      3. Engage the clamp.

      4. Connect the connector.

    4. Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.

    5. Engage the fastener to secure the front seat airbag assembly wire harness.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. Engage the 5 claws and 6 guides to install the front seat inner cushion shield.

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. Engage the 5 claws and 7 guides to install the front seat inner cushion shield.

  5. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  6. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  7. INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD


    1. A01ESP3

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    2. A01EXK7

      Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.

    3. Install the screw.

  8. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the rubber band of the separate type front seatback cover.

  9. INSTALL FRONT SEAT ASSEMBLY

    Click here