FRONT SEAT CUSHION HEATER REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01ETH6

      Disconnect the rubber band of the separate type front seatback cover.

  3. REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD


    1. A01EYG7

      Remove the screw.

    2. Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.

    3. A01EZ4E

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

  4. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01EY50

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. A01EWY2E01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. A01ETV9

      Disconnect the front lumbar power seat switch connector.

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01EVXS

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. A01EWXIE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01EVEW

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01EWNL

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01ESUG

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01EV1G

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. A01ETYS

        Disconnect the connector.

      2. Disengage the clamp.

      3. A01EX1Y

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. A01EYN3

      Disengage the hook.

    5. A01EVTY

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01ETLL

      Remove the 2 hog rings.

    2. A01EW6P

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.