REAR SEATBACK HEATER (for Fold Down Seat Type) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEATBACK ASSEMBLY LH


    1. Disconnect the rear seat outer belt assembly from the rear seat center shoulder belt guide.

    2. Fold down the rear seatback assembly LH.

    3. A01EW9GE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    4. w/o Seat Heater System:


      1. A01EWPN

        Remove the 2 bolts and rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

    5. w/ Seat Heater System:


      1. A01EWPN

        Remove the 2 bolts and disconnect the rear seatback assembly LH.

      2. A01EVU6

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly LH.

        Note

        Be careful not to damage the vehicle body.

  3. REMOVE REAR SEATBACK ASSEMBLY RH


    1. Fold down the rear seatback assembly RH.

    2. A01EYWVE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener as shown in the illustration.

    3. w/o Seat Heater System:


      1. A01EV2K

        Remove the 2 bolts and rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

    4. w/ Seat Heater System:


      1. A01EV2K

        Remove the 2 bolts and disconnect the rear seatback assembly RH.

      2. A01EYEC

        Disconnect the connector.

      3. Disengage the clamp and remove the rear seatback assembly RH.

        Note

        Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for LH Side)


    1. A01EVK3

      Remove the 2 screws.

    2. Disengage the guide and remove the rear seat center shoulder belt guide.

  5. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for LH Side)


    1. A01EWON

      Disengage the 4 claws and remove the rear seatback upper lock bezel.

  6. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)


    1. A01EU9H

      Disengage the 2 hooks.

    2. A01EYMI

      Remove the 6 hog rings.

    3. A01ESYX

      Disengage the 2 hooks.

    4. A01EYTJ

      Disengage the 4 claws and remove the 2 rear seat headrest supports.

    5. Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.

  7. REMOVE SEPARATE TYPE REAR SEATBACK COVER (REAR SEATBACK HEATER SUB-ASSEMBLY) (for LH Side)


    1. A01EWLT

      Remove the 6 hog rings and separate type rear seatback cover (rear seatback heater sub-assembly) from the separate type rear seatback pad.

  8. REMOVE NO. 1 SEAT ARMREST CAP (for RH Side)


    1. A01EYGZE03
      Text in Illustration
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 3 claws and remove the No. 1 seat armrest cap.

  9. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)


    1. A01EWRL

      Remove the bolt and washer.

    2. Disengage the guide and remove the rear seat center armrest assembly.

    3. A01EYK3

      Disengage the 2 claws and remove the bush.

  10. REMOVE REAR SEATBACK HINGE COVER (for RH Side)


    1. A01EXM0

      Remove the rear seatback hinge cover as shown in the illustration.

  11. REMOVE REAR SEATBACK UPPER LOCK BEZEL (for RH Side)


    1. A01ETMS

      Disengage the 4 claws and remove the rear seatback upper lock bezel.

  12. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)


    1. A01EWEA

      Disengage the 2 hooks.

    2. A01EUA9

      Remove the 7 hog rings.

    3. A01EUCA

      Disengage the 2 hooks.

    4. A01EYQM

      Disengage the 4 claws and remove the 2 rear seat headrest supports.

    5. Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.

  13. REMOVE SEPARATE TYPE REAR SEATBACK COVER (REAR SEATBACK HEATER SUB-ASSEMBLY) (for RH Side)


    1. A01EVI4

      Remove the 7 hog rings.

    2. A01EWPZ

      Remove the 8 hog rings and separate type rear seatback cover (rear seatback heater sub-assembly) from the separate type rear seatback pad.