OUTER MIRROR SWITCH INSPECTION


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


    1. Check the mirror select switch and mirror surface adjust switch.


      1. A01EW41E11
        Text in Illustration
        *1 Mirror select switch
        *2 Mirror surface adjust switch
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Turn the mirror select switch to the L position.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance (for left side)
        Tester Connection Switch Condition Specified Condition

        4 (MLV) - 8 (B)

        6 (M+) - 7 (E)

        		 UP Below 1 Ω
        OFF 10 kΩ or higher

        4 (MLV) - 7 (E)

        6 (M+) - 8 (B)

        		 DOWN Below 1 Ω
        OFF 10 kΩ or higher

        5 (MLH) - 8 (B)

        6 (M+) - 7 (E)

        		 LEFT Below 1 Ω
        OFF 10 kΩ or higher

        5 (MLH) - 7 (E)

        6 (M+) - 8 (B)

        		 RIGHT Below 1 Ω
        OFF 10 kΩ or higher

      3. Turn the mirror select switch to the R position.

      4. Measure the resistance according to the value(s) in the table below.

        Standard Resistance (for right side)
        Tester Connection Switch Condition Specified Condition

        3 (MRV) - 8 (B)

        6 (M+) - 7 (E)

        		 UP Below 1 Ω
        OFF 10 kΩ or higher

        3 (MRV) - 7 (E)

        6 (M+) - 8 (B)

        		 DOWN Below 1 Ω
        OFF 10 kΩ or higher

        2 (MRH) - 8 (B)

        6 (M+) - 7 (E)

        		 LEFT Below 1 Ω
        OFF 10 kΩ or higher

        2 (MRH) - 7 (E)

        6 (M+) - 8 (B)

        		 RIGHT Below 1 Ω
        OFF 10 kΩ or higher

        If the result is not as specified, replace the outer mirror switch assembly.

    2. Check the mirror retract switch.


      1. A01EW41E05
        Text in Illustration
        *1 Mirror retract switch
        *a

        Component without harness connected

        (Outer Mirror Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        10 (MF) - 7 (E) Mirror retract switch retract position Below 1 Ω
        9 (MR) - 8 (B) Below 1 Ω
        10 (MF) - 8 (B) Mirror retract switch return position Below 1 Ω
        9 (MR) - 7 (E) Below 1 Ω

        If the result is not as specified, replace the outer mirror switch assembly.