OUTER MIRROR SWITCH INSPECTION

INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)

1. Check the mirror select switch and mirror surface adjust switch.

   
   
   1. 

      Text in Illustration

      *1	Mirror select switch
      *2	Mirror surface adjust switch
      *a	Component without harness connected (Outer Mirror Switch Assembly)

      Turn the mirror select switch to the L position.

   2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for left side)
      Tester Connection Condition Specified Condition 4 (MLV) - 8 (B) 6 (M+) - 7 (E) UP Below 1 Ω OFF 10 kΩ or higher 4 (MLV) - 7 (E) 6 (M+) - 8 (B) DOWN Below 1 Ω OFF 10 kΩ or higher 5 (MLH) - 8 (B) 6 (M+) - 7 (E) LEFT Below 1 Ω OFF 10 kΩ or higher 5 (MLH) - 7 (E) 6 (M+) - 8 (B) RIGHT Below 1 Ω OFF 10 kΩ or higher

   3. Turn the mirror select switch to the R position.

   4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for right side)
      Tester Connection Condition Specified Condition 3 (MRV) - 8 (B) 6 (M+) - 7 (E) UP Below 1 Ω OFF 10 kΩ or higher 3 (MRV) - 7 (E) 6 (M+) - 8 (B) DOWN Below 1 Ω OFF 10 kΩ or higher 2 (MRH) - 8 (B) 6 (M+) - 7 (E) LEFT Below 1 Ω OFF 10 kΩ or higher 2 (MRH) - 7 (E) 6 (M+) - 8 (B) RIGHT Below 1 Ω OFF 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.

2. Check the mirror retract switch.

   
   
   1. 

      Text in Illustration

      *1	Mirror retract switch
      *a	Component without harness connected (Outer Mirror Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 10 (MF) - 7 (E) Mirror retract switch retract position Below 1 Ω 9 (MR) - 8 (B) Below 1 Ω 10 (MF) - 8 (B) Mirror retract switch return position Below 1 Ω 9 (MR) - 7 (E) Below 1 Ω

      If the result is not as specified, replace the outer mirror switch assembly.

INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)

1. 

   Text in Illustration

   *1	Mirror Adjust Switch
   *2	Mirror Select Switch
   *a	Component without harness connected (Outer Mirror Switch Assembly)

   Check the switch functions.

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition 3 (M+) - 2 (E1) Mirror adjust switch pressed up 90 to 110 Ω Mirror adjust switch pressed down 437 to 503 Ω Mirror adjust switch pressed left 744 to 856 Ω Mirror adjust switch pressed right 225 to 275 Ω Mirror adjust switch not pressed 10 kΩ or higher 1 (MSW) - 2 (E1) Mirror select switch R Below 1 Ω Mirror select switch L 90 to 110 Ω Mirror select switch off 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.

2. Check the mirror retract switch.

   
   
   1. 

      Text in Illustration

      *1	Mirror retract switch
      *a	Component without harness connected (Outer Mirror Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 8 (MF) - 4 (E2) Mirror retract switch retract position Below 1 Ω 7 (MR) - 6 (B) Below 1 Ω 8 (MF) - 6 (B) Mirror retract switch return position Below 1 Ω 7 (MR) - 4 (E2) Below 1 Ω 7 (MR) - 8 (MF) Always 10 kΩ or higher

      If the result is not as specified, replace the outer mirror switch assembly.