OUTER REAR VIEW MIRROR GLASS INSPECTION


  1. INSPECT OUTER MIRROR RH


    1. Check the shape of the heater wire.

    2. Check the outer mirror heater operation.

      A01EWSSE01

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Heater Wire Shape A
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 7.6 to 11.4 Ω
        Heater Wire Shape B
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 9.2 to 13.8 Ω
        Text in Illustration
        *A Heater Wire Shape A *B Heater Wire Shape B
        *a

        Component without harness connected

        (Outer Mirror RH)

        		 *b Heater Wire

        If the result is not as specified, replace the outer mirror RH.

  2. INSPECT OUTER MIRROR LH


    1. Check the shape of the heater wire.

    2. Check the outer mirror heater operation.

      A01EWFQE01

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Heater Wire Shape A
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 7.6 to 11.4 Ω
        Heater Wire Shape B
        Tester Connection Condition Specified Condition
        1 - 2 25°C (77°F) 9.2 to 13.8 Ω
        Text in Illustration
        *A Heater Wire Shape A *B Heater Wire Shape B
        *a

        Component without harness connected

        (Outer Mirror LH)

        		 *b Heater Wire

        If the result is not as specified, replace the outer mirror LH.