| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Bearing retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf |
| for 100, 130 A Type Generator coil assembly x Generator drive end frame |
5.6 | 57 | 50 in.*lbf |
| for 150 A Type Generator coil assembly x Generator drive end frame |
5.9 | 60 | 52 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf |
| Generator pulley with clutch x Generator rotor assembly ( ): For use with SST |
80 (57) |
816 (581) |
59 (42) |
| Generator assembly x Cylinder block | 52 | 530 | 38 |
| Wire harness clamp bracket x Generator assembly | 8.0 | 82 | 71 in.*lbf |
| Generator wire x Terminal B | 9.8 | 100 | 87 in.*lbf |