FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP


    1. A01EVQDE01
      Text in Illustration
      *1 O-ring
      *2 Fuel Pump Spacer

      Apply a light coat of fuel to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.

    2. A01EVE3E01
      Text in Illustration
      *1 Fuel Filter
      *2 Suction Filter

      Engage the 5 claws on the fuel filter and install the fuel pump with the suction filter.

      Note


      • Make sure that the O-ring is not cut or pinched during installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

  2. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. A01EUMO

      Engage the 2 claws of the No. 1 fuel suction support.

    2. Connect the fuel pump harness connector to the fuel pump.

  3. INSTALL LOWER FUEL TANK CASE SUB-ASSEMBLY


    1. Install the spring to the fuel suction plate sub-assembly.

    2. A01EU8V

      Engage the 4 claws of the No. 1 fuel suction support to install the lower fuel tank case sub-assembly to the fuel suction plate sub-assembly with the fuel filter.

    3. Install a new E-ring.

    4. Connect the fuel pump harness connectors to the fuel suction plate sub-assembly.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01ET3E

      Slide the fuel sender gauge assembly to fit the claw.

    2. Connect the connector of the fuel sender gauge assembly.