FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT FENDER APRON SEAL RH

  5. REMOVE V-RIBBED BELT


    1. A01ESWG

      Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to fix the V-ribbed belt tensioner.

  6. REMOVE CRANKSHAFT PULLEY


    1. A01EUF9E03
      Text in Illustration
      *a Hold
      A01EUL1 Turn

      Using SST, loosen the crankshaft pulley bolt.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01EVS4E01
      Text in Illustration
      *a Hold
      A01EUL1 Turn

      Using SST, remove the crankshaft pulley bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )
    3. A01EXT1

      Remove the pulley set key from the crankshaft.

  7. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01ESUEE04
      Text in Illustration
      *1 Protective Tape
      *a Cut Position

      Using a knife, cut off the timing chain case oil seal lip.

    2. Using a screwdriver, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.