DRIVE BELT INSTALLATION


  1. INSTALL V-RIBBED BELT


    1. A01EVOGE01
      Text in Illustration
      *1 V-ribbed Belt Tensioner Assembly
      *2 Generator
      *3 Water Pump
      *4 Cooler Compressor
      *5 Crankshaft
      *6 Idler

      Set the V-ribbed belt onto each part as shown in the illustration.

    2. Using SST, slowly turn the V-ribbed belt tensioner assembly clockwise and install the V-ribbed belt.

      SST
      09216-42010

      Note


      • Make sure that SST and other tools are set to the V-ribbed belt tensioner assembly securely.

      • When compressing the V-ribbed belt tensioner assembly, slowly turn the V-ribbed belt tensioner assembly.

  2. INSTALL FRONT FENDER APRON SEAL RH

  3. INSTALL ENGINE UNDER COVER RH

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

  5. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }